Firewall 27-04 (cont)
The firewall angles are now back riveted to the stainless steel firewall panels. Straightforward you may think but the panels have strengthening flutes and will not lie flat on a backplate. I used my backplate…
stainless steel
Firewall 27-04
There is quite a lot of dimpling to be done on the steel firewall panels to accept the firewall angles. Of course, these angles have to be countersunk to accept the dimples. I got a…
Firewall 27-02 to 27-03
All parts for section 27 deburred and primed apart from the stainless steel items. These took quite a bit of deburring particularly where the holes had been punched. I used a selection of needle files…
Firewall 27-01
Here we go again! All parts found for the firewall. The firewall gussets are in bag 3063 which I discovered after 30 mins of looking for them on the shelf. I should have consulted the…