Fuselage

Section 26 – Mid Fuselage Lower Structure

Deburring, and more deburring. Trying to get everything prepped in one go. Took me 2 hours to find the step reinforcements (they are in a small box) which I am going to fit! Spoke to…


Fuselage 25-05 to 25-06

Finished bolting and riveting the cover ribs to the bulkheads. Most of the rivets could be reached with the squeezer with a combination of longeron yoke and 3″ yoke. The others I had to set…


Fuselage 25-02 to 25-05

Today started with reaming the holes for the bulkhead doublers. I wasn’t looking forward to this as I had read a few horror stories on other builders’ sites. I took Vans advice in one of…


Fuselage 25-02 construction

Riveted the side channels and doublers to the bulkhead bottom channel: Had to get a Ø3/8 bolt, to temporarily bolt the pairs of F-01405B Bulkhead Bars before double-flush riveting the bars together. The plans suggest…


Fuselage 25-02 priming

Fitted the nut plates to Aft & Forward Centre Section Bulkheads. Prepped and primed all the parts for the Forward Mid Fuselage Bulkheads. An all day job.. As you can see, space is getting a…


Fuselage 25-02 (still cont)

I think I have dimpled and countersunk everything that is required in the chapter so I’m now ready to prime before assembly. Countersinking the Aft Center Section Bulkhead and Forward Centre Section Bulkhead is slightly…


Fuselage 25-02 (cont)

Vans expect a bit more of you in the first few pages of the fuselage chapter as only one side of anything symmetrical is shown. The ribs in the image are all identical apart from…


Fuselage 25-02

Started deburring and separating parts before priming. This is going to be the theme for a while as there are a lot of parts in this section. Remember to wear gloves when you’re doing this….stab..ouch..expletive..


Fuselage parts

Fuselage inventory

Two days later and I’m almost done!  The fuselage kit has a few more parts than the empennage – about three times the amount.  I have struggled to put everything away but am just about…


Crates

QB Wings & Fuselage kit delivered

After a couple of days battling with HMRC to get my crates released from the docks (Customs officer who didn’t know his own regulations), my Quick Build wings and slow-build fuselage kit arrived today.  I…